Page header

     
Last updated 13 December, 2017
NCE Logo D13 SRJ Decoder Header

To purchase NCE loco decoders click here

         
DA-SR
KRS-SR
P2KSR
SW9-SR
D13-SR
D13-SRJ
D14-SR
D408SR
Z14-SR

This is an OO/HO sized decoder with nine-pin JST connector wiring harness providing easy installation. With 1.3 Amp (2 Amp peak) motor drive it also has six function outputs. Size: 1.50" x 0.63" x 0.25".

It is a "Quick Plug" decoder ideal for Athearn GP60M, Athearn 2-8-2 and other locos equipped with a suitable 9-pin connection

 

TIP:

D13SRJ Decoder with NMRA 9 pin jack - Rev. D PC Boards

If you are going to use Surface Mount resistors on the back of the D13SRJ decoder board for LED lighting, the letters and numbers for outputs are reversed.

F marked on the board is actually the yellow back up light wire

R marked on the board is actually the white forward light wire

1 marked on the board is actually the violet F2 output wire

2 marked on the board is actually the green F1 output wire

This ONLY occurs on the Rev. D PC Boards and does not apply to any other decoder.

 

To purchase the D13SRJ decoder click here

To view the manual for the D13SRJ decoder click here

         
Copyright notice